|Model:||7204BEP 7205BEP 7206BEP||Size:||20 X 47 X 14 Mm|
|Precision Rating:||P0 P6 P5 P4 P2||Material:||Gcr15, Stainless Steel, Carbon Steel|
ball bearing contact angle,
motor ball bearing
7204BEP 7205BEP 7206BEP Stainless Steel Single Row Angular Roller Bearing For Repair Welding Machine
|Bearing material||Gcr15, Stainless Steel, Carbon Steel|
|ID*OD*W (mm)||20 x 47 x 14 mm|
|Seal type||double shields|
|Lead time||Stock or 15-30days|
|Basic dynamic load ratings/C||13.3kN|
|Basic static load ratings/C0||7.65kN|
|Vibration Level||V1, V2, V3, V4|
|Grease||Mobil polyrex EM,Kyodo Yushi SRL|
|Payment terms||T/T, L/C|
Main technical indicators:
1. Bearing accuracy index: over GB/307.1-94 P4 grade accuracy
2. High-speed performance index: dmN value: 1.3~1.8x 106 /min
3. Service life (average) : >1500 h
The service life of high-speed precision angular contact ball bearing has a great relationship with the installation:
1. The bearing shall be installed in a dust-free and clean room. The bearing shall be carefully selected and the bearing spacer shall be ground.
2. The bearing should be cleaned before installation. During the cleaning, the inner ring slope is facing upward with flexible hand induction and no sense of stagnation.
3. Special tools shall be used for bearing installation, and the force is uniform. Knocking is strictly forbidden.
4. Bearing storage should be clean and ventilated, without corrosive gas, relative humidity should not exceed 65%, long-term storage should be regularly rustproof.
Single row angular contact ball bearings can only bear the axial load in one direction, when bearing the radial load, will cause additional axial force, must apply to the corresponding reverse load, therefore, this kind of bearings are generally used in pairs.Double-row angular contact ball bearings can bear larger radial and axial bidirectional combined load and torque load, mainly radial load. They can limit the two-way axial displacement of the shaft or shell, and the contact Angle is 30 degrees.
1. Simple Design, be convenient when using
2. Low Friction coefficient
3. High limit speed
4. Short delivery time
5. Large stock
Deep groove ball bearings
Cylindrical roller bearings
Needle roller bearings
Thrust ball bearings
Thrust roller bearings
Spherical roller bearings
Angular contact ball bearings
1: T/T: 30% as deposit and 70% balance after getting a copy of B/L.
2: L/C (cannot for branded bearings.)
3: Discuss together between buyer and supplier.
Dear friend, any questions please feel free to contact us, let's learn and grow together in bearing worlds!
Contact Person: tiffany