|
Product Details:
|
| Product Name: | High Speed Angular Contact Ball Bearing | Model Number: | 7205C P4A |
|---|---|---|---|
| Bore Diameter: | 25 Mm | Outside Diameter: | 52 Mm |
| Width: | 15 Mm | Contact Angle: | 15 Degree |
| Rolling Body: | Steel Ball G5 | Cage: | Phenolic Resin Cage |
| Accuracy Class: | P4A / ABEC-7 | Arrangement: | Universal Pair, DB DF DT |
| Highlight: | high speed angular contact bearing,7205C P4A universal pair,20000RPM CNC spindle bearing |
||
The 7205C P4A is a compact high speed angular contact ball bearing designed for CNC spindle units that must accelerate quickly and hold tool position without chatter. With a 25 mm bore and a 15 degree contact angle, the bearing accepts combined radial and axial load in one direction, so a pair carries the bidirectional thrust of a machining centre spindle.
Friction torque is the limiting factor in small spindle cartridges, and this bearing attacks it from three directions. Raceway grooves are superfinished to reduce rolling resistance, the phenolic resin cage keeps ball-to-pocket clearance tight enough to stop ball skidding during rapid acceleration, and the steel balls are sorted by grade G5 diameter tolerance so each ball shares load evenly. The result is a low running temperature even when the spindle is cycled repeatedly between 4,000 and 20,000 rpm.
The universal pair design means two bearings are ground as a matched set with a fixed preload and a defined face-to-face relationship. The spindle builder can mount them back to back for high moment stiffness, face to face for better misalignment tolerance, or in tandem for heavy one-direction thrust, all with the same part number. No shims, no grinding of spacers and no trial-and-error fitting on the assembly bench.
Bore and outside diameter are held to P4A class, runout stays within two micrometres, and the contact angle is verified piece by piece. Each bearing is noise and vibration tested and the pair is checked for preload consistency before it is packed, which is why the unit behaves predictably when it is finally clamped into the housing.
| Parameter | Specification |
|---|---|
| Bore diameter d | 25 mm |
| Outside diameter D | 52 mm |
| Width B | 15 mm |
| Contact angle | 15 degree |
| Basic dynamic load rating Cr | 16.5 kN |
| Basic static load rating Cor | 10.4 kN |
| Limiting speed, grease | 20,000 rpm |
| Limiting speed, oil air | 32,000 rpm |
| Rolling body | Steel ball, G5 |
| Cage material | Phenolic resin |
| Accuracy class | P4A / ABEC-7 |
| Mounting arrangement | DB, DF, DT universal |
Typical installations are small CNC milling spindles, drilling and tapping units, high speed router heads, woodworking tenoning spindles, dental and laboratory mill heads, and belt driven grinding quills. The compact envelope makes it a natural fit for retrofit projects where the housing bore is fixed but the original bearing could not keep up with higher cutting speeds.
Because the pair carries thrust in both directions, it is often used as the front support of a spindle shaft, with a floating bearing at the rear to absorb thermal growth. Machine builders assembling automated cells value the universal pairing because one part number covers several spindle configurations across their product range.
Bearings are wrapped in oiled anti-rust paper with a matched pair label, packed into a foam lined brand box and finally into a reinforced export carton. Pair numbering on the box prevents accidental mixing of non-matching units during stock handling.
Inspection covers raceway finish, ball grade, contact angle, preload, vibration and noise. Pairs are checked as a set so that the delivered preload matches the drawing. Traceable batch records and dimensional reports ship with the goods, and our engineers can advise on grease quantity, fit selection and spacer design for your spindle drawing.
Contact Person: Xu
Tel: 18762631303
Fax: 86-0510-85117986