|
Product Details:
|
| Product Name: | Sealed Angular Contact Ball Bearing | Model Number: | 7006C 2RZ P4A |
|---|---|---|---|
| Bore Diameter: | 30 Mm | Outside Diameter: | 55 Mm |
| Width: | 13 Mm | Contact Angle: | 15 Degree |
| Seal Type: | 2RZ Non-contact Seal | Cage: | Nylon Cage |
| Accuracy Class: | P4A / ABEC-7 | Arrangement: | DB Matched Set |
| Highlight: | sealed angular contact bearing,7006C 2RZ matched set,18000RPM grinding spindle bearing |
||
The 7006C 2RZ P4A sealed angular contact ball bearing is supplied as a matched DB set for grinding spindles where grease retention and contamination exclusion matter as much as speed. Two non-contact seals close each side of the bearing, keeping coolant mist and fine grinding dust out of the raceway while adding almost no friction torque.
Grinding produces a constant cloud of abrasive particles, and once that dust reaches a precision raceway the bearing is finished. The 2RZ seal on this bearing forms a narrow labyrinth at the ring shoulder that blocks particles without touching the inner ring, so the unit still runs at 18000 rpm with a minimal temperature penalty. Grease stays inside, contamination stays outside, and the maintenance interval stretches out to the full life of the spindle cartridge.
The set is ground and assembled as a back-to-back pair with a controlled preload, giving the spindle the high moment stiffness needed to resist deflection during heavy plunge grinding. Contact angle is held at 15 degrees for balanced axial and radial capability, and each ring is superfinished to P4A accuracy so the pair shares load predictably rather than loading one bearing harder than the other.
Balls are grade G5 steel, the cage is a precision moulded nylon design that runs quietly in the 6000 to 18000 rpm band, and each set is vibration tested before shipment. Because the seal is a non-contact design, the bearing can be re-greased once in service by removing the inner seal if the application calls for an extended overhaul cycle.
| Parameter | Specification |
|---|---|
| Bore diameter d | 30 mm |
| Outside diameter D | 55 mm |
| Width B | 13 mm |
| Contact angle | 15 degree |
| Basic dynamic load rating Cr | 15.2 kN |
| Basic static load rating Cor | 9.8 kN |
| Limiting speed, grease | 18000 rpm |
| Limiting speed, oil air | 28000 rpm |
| Seal | 2RZ non-contact, both sides |
| Cage material | Nylon |
| Accuracy class | P4A / ABEC-7 |
| Matched arrangement | DB pair, light preload |
This sealed set suits internal and external grinding spindles, surface grinder wheel heads, tool and cutter grinder quills, bearing raceway grinders and high precision honing heads. It is equally at home in wet grinding lines where coolant floods the spindle nose and in dry grinding cells where fine abrasive dust is airborne.
Maintenance teams rebuilding older spindles often specify the sealed version after repeated failures caused by contaminated grease. The sealed set removes the need for an external labyrinth cover in many designs, simplifying the housing and shortening the rebuild cycle.
Each set is packed as a numbered pair in an anti-rust bag, then in a foam-lined brand box and finally in a reinforced export carton. The seal faces are protected by a plastic disc so they cannot be damaged by handling before installation.
Quality checks include seal drag torque, grease fill weight, contact angle, preload and vibration signature. Dimensional reports and material certificates accompany every batch, and we can supply installation guidance covering press fit values, mounting force direction and running-in schedules for grinding spindle rebuilds.
Contact Person: Xu
Tel: 18762631303
Fax: 86-0510-85117986