|
Product Details:
|
| Product Name: | Precision Angular Contact Ball Bearing | Model Number: | 7014AC P4A |
|---|---|---|---|
| Bore Diameter: | 70 Mm | Outside Diameter: | 110 Mm |
| Width: | 20 Mm | Contact Angle: | 25 Degree |
| Rolling Body: | Steel Ball G5 | Cage: | Phenolic Resin Cage |
| Accuracy Class: | P4A / ABEC-7 | Application: | Ball Screw Support |
| Highlight: | precision angular contact bearing,7014AC P4A screw support,high rigidity ball screw bearing |
||
The 7014AC P4A precision angular contact ball bearing is a 25° contact angle design built for ball screw support bearings, where axial rigidity and repeatable positioning decide the accuracy of the whole machine. A larger contact angle means more thrust capability per unit size, so a compact pair can carry the preload and the cutting reaction of a heavy gantry axis.
Ball screw drives load their support bearings almost purely in thrust, and they load them constantly because the screw is preloaded to eliminate backlash. A 25° contact angle spreads that thrust across a longer contact ellipse than a 15° design, so the bearing carries more axial load for the same envelope and deflects less under cutting force. For machine builders chasing repeatability on a heavy axis, that difference shows up directly in positioning error.
The rings are through-hardened bearing steel, ground and superfinished to P4A tolerance with two micrometre runout on bore and outside diameter. Balls are grade G5, the phenolic resin cage keeps friction and heat low during the continuous rotation of a screw support, and light preload is applied and verified on the assembly line so the delivered pair matches the drawing.
Each unit is dynamically balanced and noise tested, and matched pairs are supplied with a set number so the two bearings stay together through packing and installation. Because ball screw supports rarely exceed 12000 rpm, the limiting speed margin is generous, which means lower operating temperature and a longer grease life even in continuous machining duty.
| Parameter | Specification |
|---|---|
| Bore diameter d | 70 mm |
| Outside diameter D | 110 mm |
| Width B | 20 mm |
| Contact angle | 25° |
| Basic dynamic load rating Cr | 46.5 kN |
| Basic static load rating Cor | 41.5 kN |
| Limiting speed, grease | 11000 rpm |
| Limiting speed, oil air | 18000 rpm |
| Rolling body | Steel ball, G5 |
| Cage material | Phenolic resin |
| Accuracy class | P4A / ABEC-7 |
| Typical duty | Ball screw support, light preload |
This bearing is specified for ball screw support blocks on machining centres, gantry routers, laser cutting tables, press brakes, injection moulding machine axes and precision measuring equipment. It also serves as a high rigidity fixed end bearing in linear actuator and servo press designs where thrust capacity in a compact bore is the deciding factor.
Retrofit projects frequently choose the 7014AC when the original 15° bearing showed fretting marks on the raceway after a few years of preloaded screw duty. The steeper contact angle spreads the thrust load over a longer path and reduces the peak stress that drives that failure mode.
Bearings ship individually wrapped in anti-rust paper, placed in a foam-lined brand box and palletised in reinforced cartons for export. Matched pairs are kept in a single box with the set number printed on both the box and the bearing wrapper.
Inspection covers raceway profile, ball grade, contact angle, preload, noise and vibration, with dimensional reports issued per batch. Material and heat treatment certificates are available on request, and our engineering team can review your screw support layout to recommend preload class, spacer dimensions and lubrication quantity.
Contact Person: Xu
Tel: 18762631303
Fax: 86-0510-85117986